Essential details
Shipping:Express delivery
Specification Number:SLD
Product Introduction
Smart Toilet FAQ
🔧 Installation & Compatibility
Q1: Will this toilet fit in my bathroom?
A: Please confirm 3 key requirements first:
① Rough-in Size: Measure the distance from the center of the drainpipe to the wall. Choose the 305mm or 400mm version accordingly.
② Water Pressure: Tankless design requires water pressure ≥0.15MPa. If pressure is too low, contact after-sales to install a booster accessory.
③ Power Supply: A 10A three-prong grounded socket (≥40cm above ground, moisture-proof recommended) must be reserved near the toilet.
Q2: Is installation complicated? Can I install it myself?
A: Self-installation is NOT recommended. Before installation, the drain must be cleaned and the flange sealed. Improper installation may cause water leakage or odor backflow. We suggest contacting brand after-sales or a professional plumber to ensure optimal performance and no issues.
💡 Usage & Functionality
Q3: Why is the seat not heating / the water not warm?
A:
① Check if the power supply is connected properly.
② Ensure the heating/water temperature function is turned on and the level is adjusted to a comfortable temperature (power will reduce in energy-saving mode).
③ Power off the toilet for 10 seconds and restart. If the issue persists, contact after-sales to inspect the heating module.
Q4: What to do if there’s no water flow or the flow is weak?
A:
① Check if the toilet angle valve is fully open.
② Close the angle valve, remove the inlet water filter, and clean limescale.
③ Activate the nozzle self-cleaning mode, or wipe the nozzle outlet with a soft brush. Do NOT use hard objects to avoid damaging the nozzle.
Q5: Does the voice control trigger accidentally?
A: Voice recognition is only effective within a short range (1-2 meters), so accidental triggers during daily conversations are rare. If concerned, you can disable the voice function at any time and switch to remote control or button operation.
Q6: Can it flush during a power outage?
A: Yes, it supports emergency flushing. You can manually flush using the mechanical buttons on the unit or the emergency pull rope. There’s no need to worry about power failure affecting usage.
🧼 Cleaning & Maintenance
Q7: How to clean the smart toilet? Can I rinse it directly with water?
A:
① Ceramic Main Body: Wipe with neutral detergent and a soft cloth. Do NOT use steel wool or strong acid/alkali cleaners to avoid scratching the glaze.
② Cover & Main Unit: Wipe with a damp soft cloth. Never spray water directly on the circuit board or power interface to prevent short circuits.
③ Nozzle: Activate self-cleaning mode, or extend the nozzle manually and wipe with a soft cloth. Soak regularly in white vinegar to remove limescale.
Q8: How to resolve persistent odors after long-term use?
A:
① Check if the drain flange is poorly sealed, which may cause odor backflow.
② Turn on the built-in deodorization function.
③ Clean the ceramic glaze and drain pipe regularly to remove residue and prevent odor buildup.
Additional Product Intro (For Global Sales)
Elevate your bathroom experience with our cutting-edge Smart Toilet, meticulously designed for global markets. Crafted with premium materials and innovative technology, it’s ideal for residential homes, hotels, Airbnbs, and vacation rentals—catering to the diverse needs of international customers.
The sleek, minimalist design complements any bathroom decor, from modern minimalist to contemporary styles. Whether for personal use or hospitality settings, this smart toilet delivers exceptional hygiene, comfort, and convenience, elevating your daily bathing ritual.
🔧 Installation & Compatibility
Q1: Will this toilet fit in my bathroom?
A: Please confirm 3 key requirements first:
① Rough-in Size: Measure the distance from the center of the drainpipe to the wall. Choose the 305mm or 400mm version accordingly.
② Water Pressure: Tankless design requires water pressure ≥0.15MPa. If pressure is too low, contact after-sales to install a booster accessory.
③ Power Supply: A 10A three-prong grounded socket (≥40cm above ground, moisture-proof recommended) must be reserved near the toilet.
Q2: Is installation complicated? Can I install it myself?
A: Self-installation is NOT recommended. Before installation, the drain must be cleaned and the flange sealed. Improper installation may cause water leakage or odor backflow. We suggest contacting brand after-sales or a professional plumber to ensure optimal performance and no issues.
💡 Usage & Functionality
Q3: Why is the seat not heating / the water not warm?
A:
① Check if the power supply is connected properly.
② Ensure the heating/water temperature function is turned on and the level is adjusted to a comfortable temperature (power will reduce in energy-saving mode).
③ Power off the toilet for 10 seconds and restart. If the issue persists, contact after-sales to inspect the heating module.
Q4: What to do if there’s no water flow or the flow is weak?
A:
① Check if the toilet angle valve is fully open.
② Close the angle valve, remove the inlet water filter, and clean limescale.
③ Activate the nozzle self-cleaning mode, or wipe the nozzle outlet with a soft brush. Do NOT use hard objects to avoid damaging the nozzle.
Q5: Does the voice control trigger accidentally?
A: Voice recognition is only effective within a short range (1-2 meters), so accidental triggers during daily conversations are rare. If concerned, you can disable the voice function at any time and switch to remote control or button operation.
Q6: Can it flush during a power outage?
A: Yes, it supports emergency flushing. You can manually flush using the mechanical buttons on the unit or the emergency pull rope. There’s no need to worry about power failure affecting usage.
🧼 Cleaning & Maintenance
Q7: How to clean the smart toilet? Can I rinse it directly with water?
A:
① Ceramic Main Body: Wipe with neutral detergent and a soft cloth. Do NOT use steel wool or strong acid/alkali cleaners to avoid scratching the glaze.
② Cover & Main Unit: Wipe with a damp soft cloth. Never spray water directly on the circuit board or power interface to prevent short circuits.
③ Nozzle: Activate self-cleaning mode, or extend the nozzle manually and wipe with a soft cloth. Soak regularly in white vinegar to remove limescale.
Q8: How to resolve persistent odors after long-term use?
A:
① Check if the drain flange is poorly sealed, which may cause odor backflow.
② Turn on the built-in deodorization function.
③ Clean the ceramic glaze and drain pipe regularly to remove residue and prevent odor buildup.
Additional Product Intro (For Global Sales)
Elevate your bathroom experience with our cutting-edge Smart Toilet, meticulously designed for global markets. Crafted with premium materials and innovative technology, it’s ideal for residential homes, hotels, Airbnbs, and vacation rentals—catering to the diverse needs of international customers.
The sleek, minimalist design complements any bathroom decor, from modern minimalist to contemporary styles. Whether for personal use or hospitality settings, this smart toilet delivers exceptional hygiene, comfort, and convenience, elevating your daily bathing ritual.